Reviews You Can Rely On

How to Choose the Right Rain Jacket

How to Choose the Right Rain Jacket
Here tester Ian Nicholson showcases the Rab Kenitic's cool "double" hood design.
Credit: Ian Nicholson
By Ian Nicholson ⋅ Review Editor
Monday May 4, 2020

A rain jacket is one of the first pieces of performance outdoor equipment many outdoor enthusiasts purchase. The primary reason is a waterproof shell is among the most important pieces of gear for comfort and safety when a storm rolls in or the wind starts to howl. The models tested in our best rain jacket for men review span affordable rain protection for day hikes and general around-town use, to ultralight rain protection for climbing, long-distance backpacking, and trail running. Whether you're searching for your first jacket, a modern replacement for an old favorite, or an ultralight model to add to your quiver, you're in the right place.

Construction 101: 2, 2.5, and 3-layer Fabrics


Nearly every manufacturer clearly lists how many layers their jacket is constructed with, but if you're like a lot of people, you've likely wondered what does that even mean? Are more layers better? Worse? What are the pros and cons of each, and most importantly, how should this affect what products you consider?

rain jacket men - the aspect of waterproof breathable fabrics least understood by...
The aspect of waterproof breathable fabrics least understood by consumers is construction type and how if might affect a garment's performance. Below, we break down three layer, 2.5 layer, and two layer construction, as well as some basic advantages and disadvantages that each one offers.
Credit: nwt3k.com

Most rain shell fabrics use a 2, 2.5, and 3-layer construction, even though nearly all of them only look like a single layer when you hold them at the store; this is because these layers are tightly-sandwiched and laminated together. Whether it's a 2, 2.5, or 3-layer fabric, these designs share most of their construction qualities, with only a small difference generally presenting on the inside facing side of the garment. All three styles feature an outer shell fabric, commonly referred to as a face fabric, which is coated with a chemical Durable Water Repellent (AKA: DWR, more on this below) finish to help keep the outer layer from absorbing water.

Then the second, or middle layer is the actual waterproof layer, whether that be eVent, Gore-Tex, another proprietary membrane generally made of polyester or nylon, or a coated fabric.

rain jacket men - a 3-layer construction has an outer most "face fabric" treated with...
A 3-layer construction has an outer most "face fabric" treated with DWR, a waterproof material in the middle (an ePTFE like Gore-Tex or other). and then an internal fabric whose primary purpose is to protect the waterproof layer.
Credit: GORE-TEX®

3-Layer Fabrics

Three-layer fabrics feature an external DWR treated face fabric - a waterproof breathable membrane in the middle (that could be any of the types listed above) and a super-thin polyurethane (PU) film or other similar backing on the inside of the product. The goal of the third layer is to keep sweat and oils from clogging the microscopic holes in the waterproof-breathable layer, which reduces breathability and will likely make the user feel wet from sweat, that they might think is coming from the outside.

rain jacket men
Credit: WL Gore

The advantage of three-layer fabrics is they are typically the most durable because of the innermost layer, which actually protects the pores in the waterproof membrane from clogging (at least for longer), thus maintaining better breathability between washings. The disadvantage is three-layer pieces is they are not always as breathable and are often slightly heavier than many of their 2 or 2.5 layer counterparts.

rain jacket men - you can see the pattern that's part of the .5 layer; it almost looks...
You can see the pattern that's part of the .5 layer; it almost looks as if it has been painted or printed on. The goal of this layer is to protect the waterproof breathable layer from getting clogged with dirt and oils, while being as light and as breathable as possible. Another goal is to not inhibit the other layer's overall performance.
Credit: Ian Nicholson

2.5 Layer Fabrics

Outerwear that features a 2.5 layer construction looks similar to those that feature a three-layer design (with the exception that they may feel slightly lighter and more subtle). Jackets that feature a 2.5 layer construction still have the same outermost layer (the face fabric) that has been treated with DWR, minimizing how much water is absorbed in this layer, encouraging it to be off and helping to protect the waterproof layer. There is the same "middle" waterproof fabric that just in the cases of three-layer materials can be anything from an ePTFE membrane to a coated piece of nylon. This layer is often "painted on," which is why it's considered a half layer (yes, the painted on layer is the half-layer), even if it covers all of the inside surface area. It's just much thinner than the innermost layer featured on most 3-layer garments.

Jackets that feature a 2.5 layer construction offer similar breathability to 3-layer jackets, though they may occasionally feel marginally clammier, depending on their innermost lining fabric. Why? Because the innermost layer doesn't do quite as good of a job at "absorbing" and transferring sweat compared to the innermost lining fabric featured on most three-layer models. 2.5-layer jackets are typically slightly lighter and more subtle but often are not quite as durable (and must be cleaned more frequently to maintain a similar level of breathability). It is worth noting that over the past few years, we have seen the most improvement of 2.5 layer jackets; this portion of the market has grown the most, and one of the aspects we've seen the most remarkable improvements on is how they feel less clammy.

rain jacket men - here is a comparison of a 2-layer construction with the loose-mesh...
Here is a comparison of a 2-layer construction with the loose-mesh liner on the left and a 2.5-layer Patagonia Torrentshell on the right.
Credit: Ian Nicholson

2 Layer Fabrics

There has been a big change in 2-layer fabrics in the last year or two. Traditionally 2-layer products would have the same DWR face fabric bonded to a waterproof-breathable layer but then have a loose (typically mesh) liner hanging on the inside. This style of two-layer fabrics feels out of favor as 2.5 layer models become more affordable, and 2-layer garments with their hanging mesh liner were heavier, bulkier, and generally less comfortable.

Recently Gore-Tex has re-introduced a 2-layer design in their Gore-tex Paclite Plus. Paclite Plus has the same exterior face fabric laminated to their waterproof membrane, but instead of laminated a layer (like a 3-layer) or spraying on a protective coating (like a 2.5-layer) Gore has instead textured the inside of the waterproof membrane in such a way to increase its abrasion resistance making a .5 innermost or third layer unnecessary. Having only two layers means that this garment is more breathable as the moisture has less fabric to travel through while also reducing weight from the decrease in the material. It's worth noting that Paclite Plus is a different construction than older Gore Paclite, which used a traditional 2.5-layer construction. In our testing, this design seems to be working, and we haven't found that Gore's new 2-layer fabric is less durable than 2.5-layer models.

rain jacket men - here is an example of two-layer construction. like the other...
Here is an example of two-layer construction. Like the other construction types, this jacket features an outer-most layer treated with DWR. Then, there's a coated waterproof-breathable fabric that's adhered to that, and a mesh liner which hangs loosely on the inside to protect the waterproof-breathable layer.
Credit: Ian Nicholson

Waterproof Membrane Types


ePTFE Fabrics:


Gore-Tex is an ePTFE waterproof-breathable fabric that is the oldest and most widely know and has become somewhat of the Kleenex of the waterproof-breathable fabric world. On a fundamental level, Gore-Tex is a polytetrafluoroethylene (or ePTFE for short) membrane stretched out to a specific dimension. At this dimension, water vapor can escape, but liquid water cannot enter, due to both the sizes of the pores (which are 20,000 smaller than a water droplet), as well as the material's extremely low surface tension, which cannot absorb liquid water without tremendous pressure. Kinda cool, right?

rain jacket men - the beta ar hardshell is protective in stout weather, like sideways...
The Beta AR hardshell is protective in stout weather, like sideways blowing snow. It is made of 40D Gore-Tex Pro with 80D reinforcements on the shoulders.
Credit: Elizabeth Riley

Polytetrafluoroethylene is a huge word, but you might have heard it by its slightly better-known name from DuPont brand: Teflon. W.L. Gore is always trying to improve their product and understands the value in the market place that Gore-Tex has. They also want to do their best to maintain that good reputation, and to better do so, the company has strict rules and restrictions for companies that want to use their product. For example, they set rules on face fabrics, interior fabrics, zippers, and in some cases, application to help maintain their reputation of "Guaranteed to Keep You Dry."

Gore-Tex with Paclite technology now slowly becoming Gore-Tex PacLite Plus is also formerly known as Gore-Tex Paclite and is a 2.5 layer fabric with a normal Gore-Tex membrane but a proprietary super-thin half layer that completely covers the inside. Gore keeps exact specifications pretty locked up, but it more or less has the same properties as most 2.5 layer models (being lighter, more subtle, and slightly more breathable) but uses Gore-Tex as its waterproof membrane. Gore-Tex PacLite Plus is slightly different than older Paclite in that it forgoes the innermost layer entirely and textures in the inside of the waterproof membrane in such a way to resists dirt, grim while increases durability.

rain jacket men - gore-tex is easily the most widely known waterproof breathable...
Gore-Tex is easily the most widely known waterproof breathable fabric. It offers a durable and long-lasting design but isn't the most breathable option out there. Gore heavily regulates design and specifications of garments that use Gore-Tex so they can do their best to maintain their reputation and live up to their motto of "Guaranteed to Keep You Dry". Here is an Outdoor Research Foray jacket, which features a 2.5-layer Gore-Tex PacLite. After months of heavy use, it's still going strong.
Credit: Ian Nicholson

eVent

eVent is very similar in design to Gore-Tex in that it is also an ePTFE based material. It was originally designed for industrial air filters by a company owned by General Electric before the company discovered it would make a fantastic waterproof breathable textile. Similar to Gore-Tex, eVent uses an external face fabric with a very similar polytetrafluoroethylene membrane. Where the big difference is in the inner-most layer: instead of using a solid material like Gore-Tex (which uses a hydrophobic polyurethane (PU) film on the inside), eVent uses a propitiatory coating that protects the individual fibers without clogging the pores. The result is a more breathable ePTFE than Gore-Tex, yet a product that needs to be washed more frequently to maintain better breathability.

rain jacket men - event is very similar to gore-tex in that it's an epfte fabric...
eVent is very similar to Gore-Tex in that it's an ePFTE fabric stretched out to a very specific dimension.
Credit: Ian Nicholson

Polyester, Polyurethane, or PU Films


Higher-end versions of many of the new wave of PU fabrics are quickly catching up to ePTFE membranes like Gore-Tex and eVent in performance while often offering other unique advantages of their own. In these garments, the PU is the laminate that acts as the waterproof layer sandwiched between the face fabric and the innermost layer. If the PU layer is waterproof, why bother to add the ePTFE layer, you might ask? It's because when laminated to an ePTFE layer, it can be exceptionally thin; without it, it must be thicker to achieve the desired waterproof properties.

rain jacket men - pu fabrics are quickly catching up to their eptfe counterparts, like...
PU fabrics are quickly catching up to their ePTFE counterparts, like Gore-Tex and eVent. PU has an advantage in that it can be made stretchier than ePTFE fabrics, is less expensive, and has the potential to be more breathable. Here lead tester Ian Nicholson suffers in the rain to help produce a well-researched review.
Credit: Graham Zimmerman

Three of the most significant advantages to garments featuring fabric that relies on PU for its waterproofing is that they tend to be lighter, have the potential to be more breathable, and can be constructed with FAR more stretchiness. Jackets and other outerwear featuring Gore-Tex or eVent are much harder to make stretchy; simply put, even the stretchiest ePTFE fabric is nowhere near as stretchy as the stretchier PU or polyester-based options.

rain jacket men - a dwr treatment is important for a jacket's water resistance. the...
A DWR treatment is important for a jacket's water resistance. The DWR causes the jacket to bead water, allowing the high-tech fabric to breathe. All the jackets we tested have a good DWR treatment, and regular cleaning will help maintain it.
Credit: Brandon Lampley

Coated Fabrics


Coated fabrics are often used on price-pointed models and are nearly always less breathable and far less long-lasting than the above-listed materials. It's worth repeating that even a coated waterproof and breathable fabric still gets sandwiched inside an exterior fabric and interior fabric and can be used in outdoor garments using a 2, 2.5, or 3 layer construction methods. To be clear, you could have a bomber 3-layer shell jacket that still uses a coated membrane sandwiched inside two other layers that form the backbone of that garment's weather resistance. Coated fabrics like PU laminates can be made with stretchy textiles, allowing garments to have more range of motion.

rain jacket men - durable water repellent or dwr refers to the chemical treatment...
Durable Water Repellent or DWR refers to the chemical treatment applied to the jacket's exterior, which helps it bead water.
Credit: Ian Nicholson

Durable Water Repellent (DWR)


Durable Water Repellent (DWR) refers exclusively to the chemical treatment that has been applied to the exterior fabric (not the membrane or coated waterproof fabric on the inside) and its performance and job are in resisting and beading up water. The goal of DWR is to help keep the external face fabric from becoming saturated, which negatively affects breathability and gives the user a sensation of dampness in the area as a result of reduced breathability. All waterproof fabrics feature a DWR, but some level of DWR is also commonly seen on most water-resistant textiles, which can include anything from insulated jackets, wind shirts, or softshell pieces. Most companies use fluorocarbons or fluoropolymer chemicals that are applied and then subsequently bond to the outside of the exterior fabric for DWR.

rain jacket men - what does waterproof really mean? rain adds three pounds per square...
What does waterproof really mean? Rain adds three pounds per square inch of pressure to the fabric; however, most waterproof breathable fabrics can withstand a lot more than that. The US military has a 25 PSI standard that most companies use as a guideline. All the fabrics are plenty waterproof to keep you dry out in the rain. How long they last, how well they keep water out, and overall design have a major impact on their ability to keep you dry.
Credit: Ian Nicholson

What is Waterproof?


An easy answer would be "fabric that can't let any water through"; however, the problem is water can have a variable amount of force behind it that directly effects the imperviousness of a given material. For example, even concrete can be cut by highly pressurized water, but despite this, most people still consider concrete a waterproof material. Most rain generates around 2-3 PSI (PSI = pounds per square inch) of force. Rain in a severe storm (with 80+ mph winds found in a hurricane) can produce up to 10 PSI.

rain jacket men
Credit: Max Neale

rain jacket men - we divide waterproof jackets into two categories: hardshells and...
We divide waterproof jackets into two categories: Hardshells and Rain Jackets. Hardshells tend to be more featured, durable, and heavier. Rain jackets tend to be less expensive, a little more simple in design, lighter, and more compact. For example, you'll likely never see anyone use a hardshell jacket (only a lighter weight rain jacket) climbing big routes in Patagonia, the Alaska Range, or long-range hiking trails.
Credit: Ian Nicholson

Types of Waterproof Jackets


Here at OutdoorGearLab, we divide waterproof/breathable shell jackets into two categories: rain jackets and hardshells. At the most basic level, price and fabric construction distinguish these two categories from one another. Jackets generally cost about $90-$300+ and typically feature 2-2.5 layer construction, while hardshells will set you back $250-$800+ and typically feature three layers. Rain shells will work for downhill skiing but are typically a little more three-season focused being lighter and excelling at hiking, backpacking, and summertime mountaineering.

Hardshells are typically more feature-rich and offer greater durability and, as a result, are heavier and less packable. Hardshells are better for activities where durability is more of a factor like downhill skiing or snowboarding. They will obviously still work for summertime applications; they are just a little overkill.

rain jacket men - the two standard 2.5-layer models that incorporate gore-tex paclite...
The two standard 2.5-layer models that incorporate Gore-Tex Paclite fabric: Foray and Minimalist. The jackets both have pit zips, and are more expensive and more durable than models with proprietary fabrics. They are great choices for rough hiking and backpacking.
Credit: Brandon Lampley

Breathability


Similar to waterproof ratings, breathability has a scale to determine its effectiveness. However, unlike waterproof ratings where the results of a PSI water test are pretty cut and dry, breathability ratings couldn't be more different. It's not that the tests that prove how much moisture can pass through a given fabric are useless, but there are FAR more outside factors that influence the performance of the breathability of a given fabric such as the temperature, humidity, and most of all pressure. These factors also make the tests super unapplicable to real-world use. To make matters even harder, there are no standardized tests from brand to brand; while we enjoy seeing the information and reading about the newest materials, we do look at it with this in mind and with a lens of skepticism.

rain jacket men - we performed several side-by-side breathability tests for our...
We performed several side-by-side breathability tests for our review. Here tester Ian Nicholson providing valuable feedback during our 10 minute Stairmaster test.
Credit: Ian Nicholson

Breathability and Layering Approprately


It's important to remember that every jacket has a maximum limit on how much moisture can physically pass through it. Thus when you're working aerobically, you'll want to do your best to make sure that you're wearing the minimal amount of layers you can get away with. We've all soaked a synthetic or wool t-shirt while working hard or hiking uphill and a rain shell isn't any different.

rain jacket men - even the most breathable models have a limit on the amount of...
Even the most breathable models have a limit on the amount of moisture they are able to pass through. Set yourself up for success by wearing the minimum layers you can get away with. Remember that nearly everyone can drench even a t-shirt if they're working hard enough.
Credit: Ian Nicholson

Air Permeable Materials


Air-permeable is a technical term as well as a hip new buzzword in the outdoor industry. Air-permeable refers to a fabric's ability to be constantly letting air and subsequently moisture pass through it all of the time, regardless of pressure and temperature differences. This also means that these garments aren't technically windproof. Not that they feel like a cotton t-shirt on a windy day, but you will get chilled quicker with an air-permeable model than a non-air permeable one.

A common misconception about air-permeable fabrics is that just because they are air permeable doesn't necessarily mean that more moisture can pass through versus a non-air permeable model or that they offer superior breathability overall; it just depends on the fabrics and to some extent the conditions and the activity level of the user. For example, there are several air-permeable models that aren't as breathable as non-air-permeable ones like eVent and Gore-Tex if the person is exercising while wearing it and generating heat.

Confused? Here is another way to think of it; air-permeable models offer a steady level of breathability regardless of what the user is doing and the temperature outside. Fabrics like Gore-Tex and eVent vary onn how much moisture moves through them based on the difference in pressure between in the inside of the jacket and the outside. Basically, the harder you're working, and the more heat you are generating on the inside, and the colder it is outside, the better these garments will breathe. So the most breathable non-air permeable models (like Gore-Tex Active, Paclite, and eVent) are more breathable if you're at least hiking, and it isn't too warm outside. But once you stop and your body cools off, air-permeable fabrics do better.

What this does mean is air permeable models don't require the same heat build-up as non-air permeable models, and they continue to breathe even after their user has cooled off (but might still be wet on the inside). In general, a lot of the fabrics that are using air-permeable materials tend to be among the most breathable ones, especially the higher-end ones. However, several more price-pointed models are air permeable but are not as breathable as classic ePTFE likes eVent and Gore-Tex. A few models in our review that use air-permeable fabric are the Rab Kinetic Plus and Outdoor Research Interstellar.

rain jacket men - we defined ultralight jackets as models whose design was very...
We defined ultralight jackets as models whose design was very focused around making a product and light and compact as possible. These models are typically very basic, offering no "extras" like lower hand pockets or Velcro cuffs, and typically weighted 7.5 ounces or less.
Credit: Ian Nicholson

Ultralight Jackets


Ultralight models are minimally featured bare-bones jackets that are designed to be as light and as compressible as possible. These models skip classic features like lower hand pockets, much in the way of hood adjustments, and generally all ventilation features. They excel at activities where saving weight, and a minimal packed volume is of the utmost importance. These models are best suited for generally dry pursuits in cool to cold weather or shorter spats of drizzle and to guard against afternoon thunderstorms.

The ultralightweight and small packed-size makes these perfect just-in-case storm protection that you can toss in your pack, clip to your harness or stash in your running vest. Some of the top ultralight models we tested were the Outdoor Research Helium Rain (6.3 oz) and the Black Diamond Fineline (7.5 oz). Also of note, both of the models we tested have reflective logos and patches, which is a great feature for running and biking.

Depending on where people like to recreate and what they like to do, an ultralight trimmed down model might suit people better than a heavier fully featured one. The reason is most outdoor enthusiasts end up carrying their rain shell 90% or more of the time. As a result, all those rad features that seemed sweet in the store only add weight in the bottom of your pack (especially if it's a jacket you rarely actually put on).

Sizing Your Jacket


Consider if you want your rain jacket to fit snugly for more active use or a little loose to allow for layering underneath. Having a loose-fitting jacket gives you more room for insulation and base layers, but does it perform better one way or the other? A snug-fitting jacket will maximize breathability, which is the transfer of water through the fabric away from your body. Water vapor always wants to move from warm to cool. A snug-fitting jacket will create a more uniform (warm) environment inside that promotes breathability. A loose-fitting jacket better promotes ventilation. Pit zips, pocket vents, open wrist cuffs; these all move more air.

Care & Cleaning of Rain Jackets


A well cared for, clean jacket will function better and last much longer than a dirty, neglected one. First off, be kind to your jacket. Whether you stuff the jacket into its pocket or roll it away into its hood, you will prolong the performance of the DWR treatment (if you open it up at the end of your trip rather than storing it wadded up). The less abrasion and abuse the face fabric receives, the better this will help prolong the DWR and the jacket's ability to shed water.

Eventually, you will want to wash your jacket. Done correctly, washing and drying can have a miraculous effect on restoring DWR and breathability, and this shouldn't be underestimated. These jackets can all be washed in the washer; a front-load machine without a center agitator is best. All fabrics with a DWR treatment should be washed in cold or warm water using a small amount of powdered detergent. Find the manufacturer's recommendation on either the jacket's label or website, and follow it; cold water and the delicate cycle is your best bet if you have any doubts. Liquid detergents and fabric softeners should be avoided, as they have components that adhere to the fabric's fibers and encourage the piece to absorb water. Choose a double rinse cycle to remove as much soap residue as possible.

rain jacket men - the dwr treatment on these two jackets sheds water and allows sweat...
The DWR treatment on these two jackets sheds water and allows sweat to escape through the fabric. See our Care and Feeding section for info on laundering and maintaining your jacket's DWR.
Credit: Brandon Lampley

Now you have a clean jacket. Any oils, dirt, grime, soiling, and clogging up the waterproof/breathable layer will have been washed away, and the original breathability should be restored. Now comes the important bit. Hanging or laying your jacket to air dry is the safest technique. A freshly laundered, air dried jacket will sometimes restore a DWR that was once losing its ability to bead water. Carefully applying heat can work wonders when cleaning alone doesn't restore DWR. A dryer's low heat setting is the place to start.

The manufacturer's care instructions should always be consulted.

After enough use, it will be necessary to reapply a DWR treatment to your jacket's exterior. Spray-on and wash-in treatments are available. Two-layer jackets with a mesh liner should only be treated with a spray-on product; you want the mesh liner to continue to absorb sweat and get it moving towards the outside. Either is appropriate for a 2.5-layer jacket, but we prefer spray-on products.

rain jacket men - the torrentshell is an affordable yet extremely versatile jacket...
The Torrentshell is an affordable yet extremely versatile jacket. It's great for hiking or backpacking, and its hood performs so well with a helmet that our testers found it equally at home on morning bike commutes or while climbing and mountaineering.
Credit: Brandon Lampley

Here is the advanced technique for spray-on application. Wash your jacket as described above and let it air dry. Briefly place the jacket in the dryer on low heat, until all the fabric is nice and warm. Remove from the dryer, hang, and immediately spray on your new DWR. Use less spray-on product, and with a hairdryer you've readied on a low setting, accelerate the drying of the new DWR. This technique serves to both restore the original DWR that remains on the jacket and maximize the bonding of the new polymers you are applying. Nikwax and Granger both produce a full line of fabric treatments, including spray-on and wash-in varieties.

rain jacket men - consider what activities you would like to use your jacket and how...
Consider what activities you would like to use your jacket and how much hood design might come into play. For example, is it essential that the hood can fit over a climbing or bike helmet?
Credit: Ian Nicholson

Hood Design and Applications


You should consider your intended activities with your jacket and think about its hood. Is being able to fit over a climbing or bike helmet essential? Or is it a rare-enough occurrence you can just tuck it underneath? How important is good peripheral vision? None of the jackets we tested were awful, but there's no doubt that some score higher.

For the climbers and cyclists reading this, we'd recommend an over the hood design. While you can wear a given model's hood underneath your helmet and that certainly works in a pinch, you might find a helmet specific design is superior. It is far easier to flip on and off if it goes over the top of your helmet rather than trapping it underneath it. Besides being less convenient to put on and off, when you wear your hood underneath your helmet, it's warmer and is straight-up less comfortable than when you wear it on the outside.

rain jacket men - none of the models we tested offered terrible peripheral vision but...
None of the models we tested offered terrible peripheral vision but some certainly maintained it better than others.
Credit: Ian Nicholson

History of Waterproof Breathable fabrics


The world changed for waterproof clothing in 1976 when W.L. Gore and Associates introduced Gore-Tex fabrics to the market. Gore discovered and patented the process for creating ePTFE, or expanded Polytetrafluoroethylene. This thin film contains millions of small pores, too small for liquid water, but large enough for water vapor to pass through. Laminate this thin membrane to a synthetic face fabric and voila; the first waterproof and breathable fabrics. Today's waterproof/breathable layered fabrics include face fabrics that are laminated to membranes like Gore-Tex and face fabrics that are coated.

rain jacket men - tom rocks the gore-tex minimalist on a day out backcountry skiing...
Tom rocks the Gore-Tex Minimalist on a day out backcountry skiing. This jacket offers excellent water resistance and durability, as well as good breathability, even when compared to burlier 3-layer models.
Credit: Tom Forestieri

Gore-Tex rainwear quickly conquered the market or, in one sense, created the waterproof/breathable market. Competing waterproof fabrics coated with Polyurethane (PU) or Polyvinylchloride (PVC) couldn't compete. The first Gore-Tex fabrics were 2-layer construction; the ePTFE membrane laminated to a nylon or polyester face fabric and a mesh or thin fabric liner hung inside this layered fabric to protect it and provide comfort next to your skin. Gore quickly discovered the ePTFE membrane's pores could easily become clogged with oils and dirt though, and added another layer to the laminated sandwich, covering the ePTFE membrane with an oil-resistant PU layer. This PU layer protects the pores from contamination but stops all airflow through the membrane's pores. Three-layer construction was the next big advance, and mesh or scrim was laminated to the interior of the layered fabric. This innermost layer protects the membrane and provides a better transfer of water through to the outside. As the "light is right" ethos took over the outdoor world in the 90s, 2.5-layer technology did as well. This construction incorporates, instead of laminated mesh, a texturized "half layer" printed on the inner face of the layered sandwich.

So does traditional Gore-Tex breathe? No, in the sense that air does not pass through. Yes, in the sense that liquid water passes through the innermost PU layer, and then is wicked to the face fabric through the ePTFE's pores, where it evaporates. This wicking process works best with a large temperature gradient. Water always wants to move from warmer to colder zones. Fabric that does a great job "breathing" when it's cool outside will not wick nearly as much sweat away from your body when it's hot out.

rain jacket men - not only did the gore-tex foray seal out all the wet snow during...
Not only did the Gore-Tex Foray seal out all the wet snow during this three-day trip through Colorado's Black Ridge Canyon Wilderness, but the awesome ventilation meant our tester never needed to take it off to stay cool enough when faced with big climbs out of the canyons.
Credit: Brandon Lampley

Gore's original patents for ePTFE expired in the mid-90s, and competitors, many of whom had been developing PU membranes and advanced PU coatings began to experiment with PTFE technology. Options multiplied for manufacturers of outdoor performance clothing, but Gore-Tex has maintained its dominating market share for high-end waterproof/breathable fabrics. Polartec NeoShell, eVent, are the latest ePTFE laminates. None of these technologies uses a PU layer, and as a result, all are air permeable. High performing PU membranes are popular today as well; examples include Patagonia's H2No and Marmot's air permeable NanoPro laminate. As these newer, truly breathable, or air permeable, membranes gain traction, Gore has gotten on board as well. Gore's latest version of Gore-Tex Pro is the first to eliminate the PU layer, creating the first air permeable Gore-Tex fabric. In our review of hardshell jackets, you'll find jackets intended for serious mountain activities, constructed with these advanced three-layer laminates.

Further Reading


Here is a good summary of many of the top of the line waterproof/breathable fabrics. Marmot's new NanoPro fabrics are rightly garnering much attention. Here is a good article comparing NanoPro to the new air-permeable Gore-Tex Pro. For those of you interested in the history of Gore-Tex, and how W.L. Gore revolutionized the outerwear market, and perhaps discouraged further innovation, read Insane in the Membraine.